ART. 204
4 PRONGED TEE-NUTS
The steel “SICUR” Tee Nuts , given their reduced thickness and the strength of their tip and thread, represent the ideal means to unite or fix components that can always be dismantled. Embedded in wood or in chip board and then covered by laminated plastic or veneer, they resolve many of the problems encountered during assembly. They are employed with ever increasing frequency in the production of seats, armchairs and office equipment, they are also widely used in the manufacturing of babyhood articles.
The measurements are expressed in mm. Tolerances: ± 0.2 for both heights and diameters. Center height tolerances: ± 0,3. Tighter tolerances on request.
| Filetto metrico / Metric Thread | A | B | D | E | P | S | kg 1000 pz |
|---|---|---|---|---|---|---|---|
| M3 | 5 | 13 | 4.5 | 4.3 | 3.5 | 0.8 | 1,1 |
| M4 | 5 | 15 | 5.1 | 5.1 | 3.3 | 0.9 | 1,5 |
| M4 | 6 | 15 | 5.2 | 5 | 4.3 | 0.9 | 1,55 |
| M4 | 8 | 15 | 5.2 | 4.9 | 4.3 | 0.9 | 1,65 |
| M5 | 6 | 15 | 5.9 | 5.9 | 3.5 | 0.9 | 1,55 |
| M5 | 5 | 17 | 6.4 | 6.3 | 4.5 | 1 | 2000 |
| M5 | 6 | 17 | 6.4 | 6.2 | 5.3 | 1 | 2000 |
| M5 | 7 | 17 | 6.5 | 6.2 | 5.3 | 1 | 2,15 |
| M5 | 8 | 17 | 6.5 | 6.3 | 5.3 | 1 | 2,2 |
| M5 | 9 | 17 | 6.4 | 6.3 | 5.3 | 1 | 2,55 |
| M5 | 10 | 17 | 6.3 | 6.2 | 5.3 | 1 | 2,6 |
| M5 | 11 | 17 | 6.3 | 6.1 | 5.3 | 1 | 2,65 |
| M5 | 12 | 17 | 6.3 | 6.1 | 5.3 | 1 | 2,7 |
| M5 | 9 | 19 | 6.8 | 6.5 | 6.7 | 1.2 | 3,4 |
| M6 | 8 | 17 | 7.3 | 7.2 | 5.5 | 1.2 | 2,7 |
| M6 | 7 | 19 | 7.7 | 7.5 | 5.1 | 1.2 | 3,3 |
| M6 | 8 | 19 | 7.8 | 7.5 | 6.7 | 1.2 | 3,4 |
| M6 | 9 | 19 | 7.8 | 7.5 | 6.7 | 1.2 | 3,5 |
| M6 | 10 | 19 | 7.8 | 7.5 | 6.7 | 1.2 | 3,8 |
| M6 | 12 | 19 | 8 | 7.5 | 6.7 | 1,25 | 4,3 |
| M6 | 14 | 19 | 8.2 | 7.7 | 6.7 | 1.3 | 5,25 |
| M6 | 15 | 19 | 8.2 | 7.7 | 6.7 | 1.3 | 5,35 |
| M6 | 18 | 19 | 8.2 | 7.7 | 7.5 | 1.3 | 5,9 |
| M6 | 9 | 25 | 8 | 8 | 7.5 | 1.5 | 6,65 |
| M8 | 9 | 22 | 9.9 | 9.7 | 6.6 | 1.5 | 5,8 |
| M8 | 11 | 22 | 9.8 | 9.6 | 8.3 | 1.5 | 6,1 |
| M8 | 12 | 22 | 9.8 | 9.5 | 8.3 | 1.5 | 6,35 |
| M8 | 13 | 22 | 10.4 | 10 | 8.3 | 1.6 | 7,75 |
| M8 | 15 | 22 | 10.4 | 9.8 | 8.3 | 1.6 | 8,000 |
| M8 | 17 | 22 | 10.4 | 9.6 | 8.3 | 1.6 | 8,300 |
| M8 | 20 | 22 | 10.4 | 9.5 | 8.3 | 1.6 | 8,750 |
| M10 | 8.2 | 25 | 11.8 | 11.8 | 4.5 | 1.8 | 7,900 |
| M10 | 12 | 25 | 12 | 11.8 | 9.2 | 1.8 | 9,300 |
| M10 | 13 | 25 | 12 | 11.8 | 9.2 | 1.8 | 9,450 |
| M10 | 16 | 25 | 12 | 11.7 | 9.8 | 1.8 | 9,900 |
| M10 | 17.8 | 25 | 12 | 11.6 | 9.8 | 1.8 | 10,500 |
| Filetto Withworth / Withworth Thread | A | B | D | E | P | S | kg 1000 pz |
|---|---|---|---|---|---|---|---|
| 3/16" | 8 | 17 | 6.2 | 5.8 | 5.3 | 1 | 2,3 |
| 3/16" | 9 | 17 | 6.2 | 5.9 | 5.3 | 1 | 2,35 |
| 3/16" | 10 | 17 | 5.9 | 5.8 | 5.3 | 1 | 2,45 |
| 3/16" | 12 | 17 | 5.8 | 5.5 | 5.3 | 1 | 2,65 |
| 1/4" | 9 | 19 | 7.8 | 7.5 | 6.7 | 1.2 | 3,25 |
| 1/4" | 10 | 19 | 7.8 | 7.5 | 6.7 | 1.2 | 3,56 |
| 1/4" | 12 | 19 | 8 | 7.5 | 6.7 | 1.25 | 4,2 |
| 1/4" | 14 | 19 | 8.2 | 7.7 | 6.7 | 1.3 | 5000 |
| 1/4" | 15 | 19 | 8.2 | 7.7 | 6.7 | 1.3 | 5,1 |
| 5/16" | 9 | 22 | 9.9 | 9.7 | 6.6 | 1.5 | 5,8 |
| 5/16" | 11 | 22 | 9.8 | 9.6 | 8.3 | 1.5 | 6,1 |
| 5/16" | 13 | 22 | 10.4 | 10 | 8.3 | 1.6 | 7,65 |
| 5/16" | 15 | 22 | 10.4 | 9.8 | 8.3 | 1.6 | 8000 |
| 5/16" | 17 | 22 | 10.4 | 9.6 | 8.3 | 1.6 | 8,4 |
| 3/8" | 12 | 25 | 11.6 | 11.3 | 9.2 | 1.8 | 9000 |
| 3/8" | 13 | 25 | 11.6 | 11.3 | 9.2 | 1.8 | 9,2 |